Maverick™ MultiPro

The Maverick High Frequency-Insulated Gate Bipolar Transistor (HF-IGBT) Charger returns more energy at a lower cost than conventional chargers it has a very high power factor and is the most efficient charger available, resulting in the lowest operating cost. Additionally, the MultiPro automatically determines battery voltage and adjusts its output accordingly and as lower battery heating due to a very low ripple current.

Features & Benefits

No battery modifications are required.

  • Includes the TCC 2.0 controller
    • Delayed start from fifteen minutes to four hours in fifteen minute intervals
    • Equalize can be done manually, automatically with day/time setting, or every five cycles
    • Automatic refresh charge every twenty-four hours
    • Programmable charge block out time(peak demand electrical cost control)
    • Programmable charge termination when battery voltage reaches the gassing point, to prevent excessive gassing.
    • Remote Control Interface for use when mounted above arms each
    • Auto start with five second delay
  • Automatic shutdown for the following:
    • 80% or final charge exceeds time limit
    • Volts per cell outside safe limits
    • Charging current too high or too low
    • Maximum battery temperature exceeded
    • Charger internal temperature exceeded
  • Digital readout displays
    • Time remaining to 80% & Full Charge
    • Charge current/voltage
    • Equalize in process
    • Fault codes
    • Charge data twenty five cycles (time, AH returned, and voltage)
    • Charger setup
  • LED charge status indicators
    • Gas Gauge
    • Charging
    • 80% Charged
    • Charge Complete
    • Equalize
    • Fault Shutdown
  • Cool down time displayed
  • Programmable Voltage and AmpHr Capability
  • Quickly determines battery voltage without any peripheral devices (AES Proprietary BatteryIntegration Algorithm)
  • 3 Year Warranty

Product Safety

  • UL Listed
  • UL Listed to Canadian Safety Standards
  • AC Specifications – 480 VAC

Optional Features

  • Battery electrolyte temperature sensor
  • Wall Mount & Stacking Brackets
  • Remote Control Box
  • Custom Output Cable Lengths up to 20′ maximum.
  • Weight: (Approx. 70 to 120 Ibs., depending on model size)

Download PDF Manual

 

Download Spec Sheet

 

Download Sell Sheet

In an effort to reduce our impact on the environment, we have sell sheets and manuals available for download from the links above. If you require high resolution, print quality versions, please make your request by emailing jmorgan@appliedenergysol.com.

Proud Member of
 
All major credit card accepted. Leasing also available