Workhorse™ Series 1

Rugged, single-shift capacity charger where consistency, reliability and efficiency are key factors without the pressure of recharge time.

Features & Benefits

  • Fully integrated microprocessor control for automatic volt/time termination
  • Selectable refresh charge for 30 minutes every 24 hours
  • Ten to sixteen hours charge time.
  • Auto start with five second delay
  • Selectable one hour time delay
  • Memory retention during AC power loss
  • Automatic shutdown for the following conditions:
    • 80% charge does not occur in twelve hours
    • Volts per cell are too high or too low
    • Charging current is too low
    • Battery cable is disconnected while charging
  • Ferroresonant tapered charge for optimum battery and charger life
  • Selectable 80% voltage of 2.37 or 2.45 volts per cell
  • Digital display for showing:
    • Charge current
    • Fault codes
  • Multi color LED’s indicating charging status, equalization mode and fault shutdown
  • Red push button for manual shutdown
  • Manual jump start for over-discharged batteries
  • Manual equalize button
  • Supplied with seven foot AC line cord and plug (line cord not provided on 12A750, 18A450, 18A600, 18A750, 24A600 @120V AC)
  • Ten foot long output cables for added flexibility
  • Numerous Output connectors available as standard

Product Safety

  • UL Listed
  • UL Listed to Canadian safety standards

Optional Features

  • Wall Mount brackets available

Download PDF Manual

 

Download Spec Sheet

 

Download Sell Sheet

In an effort to reduce our impact on the environment, we have sell sheets and manuals available for download from the links above. If you require high resolution, print quality versions, please make your request by emailing jmorgan@appliedenergysol.com.

Proud Member of
 
All major credit card accepted. Leasing also available